Note:

• The full product specifications below are from the manufacturer and may contain information related to other package quantities that will not apply to the product that you are reviewing. Please confirm the actual content and/or package quantity from the main product specifications page.
• These specifications may represent the entire product series/model/line to which this product belongs with specific configuration differences between the individual products stated.
• These specifications may have been copied from the same product in other region/country in which case there might be minor differences in region-specific data such as Input Voltage, Terms of Warranty etc.

UPS output power rating (0,9 p.f.)
kVA: 8 
kW: 7.2

General
Efficiency in double conversion mode (full load): 92%: 
Efficiency in double conversion mode (half load): 90%: 
Efficiency in high efficiency mode: up to 98%: -
Distributed paralleling with Hot Sync technology: 4
Field upgradeable: yes
Inverter/rectifier topology: transformer-free IGBT with PWM
Audible noise: < 50 dB
Altitude (max): 1000 m without derating (max 2000 m)

Input
Input wiring: 1 ph or 3 ph + N + PE
Nominal voltage rating (configurable): 220/380, 230/400, 240/415 V 50/60 Hz
Input voltage range: Low -20% at 100% load/-50% at 50% load without battery discharge; High +10%/max +20%
Input frequency range: 45-65 Hz
Input power factor: 0,99
Input ITHD: less than 4,5%
Soft start capability: Yes
Internal backfeed protection: Yes

Output
Output wiring: 1 ph + N + PE
Nominal voltage rating (configurable): 220/380, 230/400, 240/415 V 50/60 Hz
Output UTHD: <3% (100% linear load); <5% (reference non linear load)
Output power factor: 0,9 (e.g. 9 kW at 10 kVA)
Permitted load power factor: 0,7 lagging - 0,8 leading
Overload on inverter: 10 min 100-110%; 1 min 110-125%; 5 sec 125-150%; 300 ms >150%
Overload when bypass available: 60 min 100-110%, 10 min 110-125%; 1 min >125- 150%

Battery
Type: Maintenance-free VRLA batteries, NiCd
Charging method: ABM technology or Float
Temperature compensation: Optional
Battery nominal voltage (lead-acid): 384 V (32x12 V, 192 cells)
Charging current / Model: Default 3 A
Max 30 A: Default 3 A
Max 60 A
May be limited by maximum UPS input current rating

Accessories
Isolation transformer, long-life batteries, external battery cabinets, UPS Center (input, bypass, distribution), X-Slot connectivity (Web/SNMP, ModBus/ Jbus, Relay, Hot Sync, ViewUPS-X remote display), Hot Sync parallel tie cabinet, integrated manual bypass, external maintenance bypass switch

Communications
X-Slot: 2 communication bays
Serial ports: 1 available
Relay inputs/outputs: 2/1 programmable

Compliance with standards
Safety (CB certified): IEC 62040-1, IEC 60950-1
EMC: IEC 62040-2
Performance: IEC 62040-3